Hi folks! So glad you’re joining me to see my second St. Patrick’s Day pallet sign. If you had a chance to see yesterday’s We’re a Wee Bit Irish sign you would have seen just how I put these guys together. It is so easy, not to mention cheap! Both of these stunning pieces of St. Paddy’s decor cost me only $1 for the pack of carpet tacks (thanks to my sista with a steed, the horseshoes were FREE). Who doesn’t want to feel a little extra luck?
The only difference in the preparation of the two signs is that this one I gave a coat of stain before stencilling. Also, I was running low on vinyl so I just used cardstock to create the mask. It surprisingly worked just fine, I just taped the edges down with painters tape. I used a dabbling motion rather than brushing with my foam brush.
When the paint was dry I gave the entire sign a good go over with a sanding block, it made it look a bit more worn. I then nailed on my horseshoe with carpet tacks and Viola a sign to bring you luck!
You most certainly need to create one of these signs, every home needs a little extra luck! If you give it a try please be sure to link up on the Fynes Designs Facebook page. I love to see your creations, plus I have a fun survey going on, I’d love to know your opinion.
-V
I’m Linking up over at:
Crystelle Boutique says
What a fun idea! How come zi never thought of this! Pinning1
hugs x
Crystelle
Crystelle Boutique says
I guess I can’t spell: what I meant was “How come I never thought of this….”
Virginia says
My typing isn’t exactly top shelf, I understand gibberish! Thanks for your kindness!
Trish @ Uncommon says
This is such a beautiful sign! We featured it tonight and are so grateful that you submitted it! Have a wonderful night!
Take care,
Trish
Virginia says
Thanks so much! I really enjoyed making it, I think it is the beginning of a sign making addiction!
Sam@Thrive 360 Living says
I really love this sign and I’m jealous because I wish I was handy enough to make something like this. Unfortunately I’m clueless when it comes to using wood for projects. Maybe I’ll put it on my goal list for this year. Thanks for sharing!
Virginia says
I can’t lie, I have a handy ‘behind the scenes’ elf on my staff if I run into a snafoo!
Monica Mathis says
Where do you get your “letters” from ??
Virginia says
I created the stencil using my cricut. I think plantain schoolbook font
Dawn says
Love, love, love this! How cute and creative to use the horseshoe! About to pin it! 🙂
Shannon says
I have my lucky horseshoe (yes really) and this is the perfect way to display it.
Virginia says
Thats great that you really have one! You certainly need a way to display it!
Christine says
Hi… Love love love this. When we were dating my husband and I found a horseshoe. We call it our lucky horseshoe. It’s been sitting in our garage for years. What a perfect way to display. I so happy I found this blog. I have 1 question. Do you know what size font and overall board measurements? I’m definitely making this one!!
Virginia says
This sounds like the perfect sign for you! The overall sign is approx 30″ long by 18″ wide. The letters are about 8″ tall. I hope that helps, I’d love to see your project when your done! Thanks for stoping by!
David says
How do you keep your stencil from bleeding?
Virginia says
I didn’t have much trouble with the pallet wood and bleeding. However, if you use a pouncing motion rather than brush stokes on the edges you’ll be better off. Good “luck”!
Ryanne says
Hi, I absolutely love this and would love to make one similar. Can you tell me approximately what the dimensions are?
Virginia says
The sign is approx 3′ long and 18″ wide. I’d love to see what you create
Ryanne says
Ours turned out great! I’d be happy to share a picture, but there isn’t an option for posting pictures?
Virginia says
Swing by my Facebook page, I’d love to see!
Virginia says
Swing by my Facebook page, I’d love to see your creation!
Ryanne says
Done and done 🙂
Lee Anne Wonnacott says
Hello Fynes Designs:
I would like to use your Nailed Horsehoe on the old board image as the cover on my e-book. I wrote a story about a blacksmith in the old west. How can I use your image for my story?
Thank you,
Lee Anne Wonnacott
Virginia says
You’re welcome to take the image from the blog and use it. However I can’t send you a High res because my computer crashed and its gone now.